How to thread a singer stylist sewing machine

Why won’t my machine pick up the bobbin thread?

how to thread a singer stylist sewing machine

Threading a sewing machine can be a daunting task, but it doesn't have to be! These general tips and hints will help you get a quick start on threading your.


First, make sure the bobbin-winding spindle located on top of your machine has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. Next, make sure your needle is inserted correctly, as far as it will go, with the flat side facing back. Also, make sure your bobbin is in correctly not backwards and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Tug on it as the needle goes down and then comes up again. You should see a small loop come up through the needle plate this is your bobbin thread , using the tip of a narrow object like a pencil or scissors, pull the loop up and then pull both threads top and bobbin under the foot and toward the back of the machine.

You're in an excellent sewing groove, your machine humming along, when out of nowhere your thread begins tangling on your fabric.
ao smith hot water heater leaking from bottom

Raise needle to its highest position by rotating the hand wheel towards you. Raise presser foot. Lead thread passing it first through the lower slot on the underside of the thread guide. Next through the upper slot, leading the thread over and around to the right. Pull thread into thread guide.

Singer sewing machines have to be threaded in a specific way. Otherwise, you may end up with a thread jam in your stitches, or you may not be able to make stitches at all! Start by getting your sewing machine ready to thread. Then, thread the top portion of your machine. After that, load the bobbin and turn the wheel to catch your thread! To thread a Singer sewing machine, first switch it off, raise the needle, and lift the presser foot. Next, place a full spool onto the pin, thread the end through the guides, and then thread it through the threading canal.

How to Thread a Machine

With stitches from which to choose, you can create and embellish fashions, home decor and much more. - Now stitch a shirt button in just a single step with singer stylist sewing machine.







  1. Margalit A. says:

Leave a Reply

Your email address will not be published. Required fields are marked *